Every Boiler in Your Plant. One Screen. From Anywhere.
A clear, live picture of each boiler — its status, pressure, flame, and efficiency — so your team can spot trouble early, prove its daily safety checks, and keep it running at peak efficiency, whether you're in the boiler room or checking your phone from home.
This is BurnerLink, running right now
A working simulation of the on-site operator screen. Press Start to run the ignition sequence, drag the load limit, set a new pressure target, or inject a fault to watch it lock out — it all responds live.
Combustion Efficiency
Load LimitAUTO
Alarms
Live Trend · last 2 min
Total clarity on every boiler
What you get the day it goes live — no extra staff, no walking the plant to check a gauge.
See the whole boiler at a glance
One full-screen view shows each boiler in plain English — Standby, Starting, Firing, Running, or Shutting Down — with the numbers that matter in big, easy-to-read type. Anyone on shift can tell in one second whether the boiler is healthy and on target.
Prove your daily safety checks
The daily safety walk-down is guided, time-stamped, and logged with the operator's name. A banner turns green the moment today's checks are done — leaving a ready-made record that satisfies owners, insurers, and inspectors without digging through paper.
Stop sending a truck for nothing
A live alarm list and a 24-hour history let your team see exactly what happened overnight or on the prior shift, and decide whether a problem is real before anyone drives in. Diagnose nuisance trips remotely and skip the unnecessary after-hours visits.
Cut your fuel bill
Live efficiency, oxygen, and flame readings show how cleanly each boiler is burning, while time-of-day scheduling automatically eases targets overnight and raises them for production. Your boilers stop burning hard when nobody needs the steam.
Catch problems before outages
Early visibility into pressure, flame strength, and alarms means trouble gets spotted while it is still small. For hospitals, schools, campuses, and production plants, that early warning is the difference between a quick adjustment and a costly shutdown.
Everything that matters, on one screen
- Plain-English status: Standby · Starting · Firing · Running · Shutting Down
- Operating pressure vs. your target
- Fuel output and firing rate
- Flame strength
- Oxygen level and combustion efficiency
- Total run hours, current run time, and cycle count
- Today's daily safety-check status (green when done)
- Current alarms and a 24-hour alarm history
- Auto or Manual load mode — and who is signed in
Always on. Always accountable.
BurnerLink is built around safety and accountability. Every start, stop, target change, and safety check is tied to the person signed in, so there is always a clear record of who did what — and sign-in roles make sure only authorized people can run or adjust a boiler. Because the live view is always on, managers see the real condition of every boiler instead of walking the plant or calling the operator. Whether you run a single unit or a whole boiler house, you get the same clear picture and the same audit-ready trail.
See every boiler from anywhere
Book a live BurnerLink walkthrough and we will show you exactly how it looks on your equipment — for one boiler or a whole boiler house.